The design is based on two individual detectors. Each detector
has its own feedthrough flange. The two detector boxes are
interchangeable. A centerframe supports the two detectors
after installation in the vacuumtank. Problem is the stiffness
of the centerframe which has one 'hanging' support.
An other problem is the RF shielding which is very difficult
to 'close' in this design.
Comments:
FEA results: to obtain sufficient stiffness of center frame,
a rather complex structure needs to be used
reduced space and accessibility
MAFIA: WF suppressors on sides of the two detector boxes are needed
Not easy to find a solution with current
design because center frame is “in the way”
and because of the fact that the two boxes
are mounted separately into the tank
Dynamic vacuum: we must have the option to insert a Titanium evaporator
not easy with current design
must enter from the front of tank and, again,
center frame is “in the way”
Pictures:
|
|
|
|
Si detectors |
Total design |
Center frame |
Vacuumtank |
|